This is round nema 14 stepper motor with stel angle 0.9deg and body length 24mm. It has 4 wires, each phase draws 0.45A and holding torque 0.13Nm(18.4oz.in).
Electrical Specification
Part Number: 36HR24-0454S
Step Angle: 0.9deg
Bi/Unipolar: Bipolar
Holding Torque: 0.13Nm(18.4oz.in)
Rated Current/phase: 0.45A
Phase Resistance: 38.0ohms
Inductance: 47.0mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: Φ36.5mm
Body Length: 24mm
Shaft Diameter: Φ5mm
Shaft Length: 15mm
D-cut Length: 10mm
Number of Leads: 4
Lead Length: 300mm
Weight: 110g
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 0.9 |
| Holding Torque(Nm) | 0.13 |
| Holding Torque(oz.in) | 18.4 |
| Rated Current(A) | 0.45 |
| Phase Resistance(ohm) | 38.0 |
| Phase Inductance(mH) | 47.0 |
| Physical Specification | |
| Frame Size(mm) | Φ36.5 |
| Body Length(mm) | 24 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 15 |
| No. of Leads | 4 |
| Lead Length(mm) | 300 |
| Weight(KG) | 0.11 |
