HBS series product is means Closed Loop Stepper Drive, offers an alternative for applications requiring higher performance and higher reliability than open loop stepper system, and it remains cost-effective. The matched stepper motors 23. 24 34 combined with an internal encoder which is used to close the position, velocity and current loops in real time.
Key Features:
- Operating voltage 16-70VDC, output peak current 0-8A
- Logic Signal Current 7-16mA(Typical 10mA)
- Pulse Input Frequency 0-200kHz
- Pulse Width 2.5μS
- Isolation Resistance 500MΩ
- Closed-loop, eliminates loss of synchronization
- No Tuning and always stable
- Do not need a high torque margin
- Broader operating speed range
- Reduced motor heating and more efficient
- Smooth motion and super-low motor noise
- Protections for over-voltage, over-current and position following error
Operating Environment and other Specifications:
- Cooling: Natural Cooling or Forced cooling
- Environment: Avoid dust, oil fog and corrosive gases
- Ambient Temperature: 0-50℃
- Humidity: 40%-90%RH
- Operating Temperature: 70℃ Max
- Storage Temperature: -20-65℃
- Weight: 280g
Contact Us
| Drive Specification | |
| Input Voltage(VDC) | 20-50 |
| Output Current(A) | 0-8 |
| Micro-step Resolutions | 400-51200 |
| Matched Size | NEMA8-NEMA23 |
| Weight(G) | 280 |
