This is the biggest CNC nema 42 stepper motor we have. It has size 110x110x201mm with 4 wires, each phase drawing current 8A with huge torque up to 30Nm (4248oz.in). A length of 55m rear shaft is available for mounting encoder, hand wheel or equals.
Electrical Specification
Part Number: 110HS201-8004D
Step Angle: 1.8deg
Bi/Unipolar: Bipolar
Holding Torque: 30Nm(4248oz.in)
Rated Current/phase: 8.0A
Phase Resistance: 0.7ohms
Inductance: 13.5mH
Driving Voltage: 110-220VAC
Physical Specification
Frame Size: 110x110mm
Body Length: 201mm
Shaft Diameter: Φ19mm
Front Shaft Length: 55mm
keyway Shaft Length: 35mm
Rear Shaft Length: 55mm
keyway Shaft Length: 35mm
Number of Leads: 4
Lead Length: 500mm
Weight: 12kg
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 30 |
| Holding Torque(oz.in) | 4248 |
| Rated Current(A) | 8.0 |
| Phase Resistance(ohm) | 0.7 |
| Phase Inductance(mH) | 13.5 |
| Physical Specification | |
| Frame Size(mm) | 110x110 |
| Body Length(mm) | 201 |
| Shaft Type | Keyway |
| Single Shaft/Dual Shaft | Dual Shaft |
| Front Shaft Diameter(mm) | 19 |
| Front Shaft Length(mm) | 55 |
| Rear Shaft Diameter(mm) | 19 |
| Rear Shaft Length(mm) | 55 |
| No. of Leads | 4 |
| Lead Length(mm) | 500 |
| Weight(KG) | 12 |
