This is bipolar Nema 42 CNC stepper motor with size 110x110x115mm. It has 4 wires, each phase draws 6A with holding torque 12Nm (1700oz.in). A length of 55mm rear shaft is avaibale for encoder, brake or equals mounting.
Electrical Specification
Part Number: 110HS115-6004D
Step Angle: 1.8deg
Bi/Unipolar: Bipolar
Holding Torque: 12Nm(1700oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.37ohms
Inductance: 4.9mH
Driving Voltage: 110-220VAC
Physical Specification
Frame Size: 110x110mm
Body Length: 115mm
Shaft Diameter: Φ19mm
Front Shaft Length: 55mm
keyway Shaft Length: 35mm
Rear Shaft Length: 55mm
keyway Shaft Length: 35mm
Number of Leads: 4
Lead Length: 300mm
Weight: 6.6kg
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 12 |
| Holding Torque(oz.in) | 1700 |
| Rated Current(A) | 6.0 |
| Phase Resistance(ohm) | 0.37 |
| Phase Inductance(mH) | 4.9 |
| Physical Specification | |
| Frame Size(mm) | 110x110 |
| Body Length(mm) | 115 |
| Shaft Type | keyway |
| Single Shaft/Dual Shaft | Dual Shaft |
| Shaft Diameter(mm) | 19 |
| Front Shaft Length(mm) | 55 |
| Rear Shaft Length(mm) | 55 |
| No. of Leads | 4 |
| Lead Length(mm) | 500 |
| Weight(KG) | 6.6 |
