This dual shaft Nema 34 CNC stepper motor has holding torque 8.5Nm (1204oz.in) with one length of 34mm rear shaft.
Electrical Specification
Part Number: 86HS115-6004D
Step Angle: 1.8deg
Bi/Unipolar: Bipolar
Holding Torque: 8.5Nm(1204oz.in)
Rated Current: 6.0A
Phase Resistance: 0.6ohms
Inductance: 6.5mH
Driving Voltage: 36-60VDC
Physical Specification
Frame Size: 86x86mm
Body Length: 115mm
Shaft Diameter: Φ14mm
Front Shaft Length: 37mm
Keyway Length: 25mm
Front Shaft Length: 28mm
Keyway Length: 25mm
Number of Leads: 4
Lead Length: 500mm
Weight: 3.6kg
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 8.5 |
| Holding Torque(oz.in) | 1204 |
| Rated Current(A) | 6.0 |
| Phase Resistance(ohm) | 0.6 |
| Phase Inductance(mH) | 6.5 |
| Physical Specification | |
| Frame Size(mm) | 86x86 |
| Body Length(mm) | 115 |
| Shaft Type | Keyway |
| Single Shaft/Dual Shaft | Dual Shaft |
| Front Shaft Diameter(mm) | 14 |
| Rear Shaft Diameter(mm) | 14 |
| Rear Shaft Length(mm) | 28 |
| No. of Leads | 4 |
| Lead Length(mm) | 500 |
| Weight(KG) | 3.6 |
