This is dual shaft NEMA 24 stepper motor with step angle 1.8deg and 100mm body length. It has 4 wires, each phase drawing 4.2A and holding torque 4.0Nm(566oz.in) and a length of 15mm rear shaft is available.
Electrical Specification
Part Number: 60HP100-4204S
Step Angle: 1.8deg
Bi/unipolar: Bipolar
Holding Torque: 4.0Nm(566oz.in)
Rated Current/phase: 4.2A
Phase Resistance: 0.7ohms
Inductance: 3.0mH
Driving Voltage: 24-60VDC
Physical Specification
Frame Size: 60x60mm
Body Length: 100m
Front Shaft Diameter: Φ8mm
Front Shaft Length: 21mm
Front D-cut Length: 15mm
Rear Shaft Diameter: Φ8mm
Rear Shaft Length: 15mm
Rear D-cut Length: 13mm
Number of Leads: 4
Lead Length: 500mm
Weight: 1.7Kg
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 4.0 |
| Holding Torque(oz.in) | 566 |
| Rated Current(A) | 4.2 |
| Phase Resistance(ohm) | 0.7 |
| Phase Inductance(mH) | 3.0 |
| Physical Specification | |
| Frame Size(mm) | 60x60 |
| Body Length(mm) | 100 |
| Shaft Type | D-cut |
| Front Shaft Diameter(mm) | 8 |
| Front Shaft Length(mm) | 21 |
| Rear Shaft Diameter(mm) | 8 |
| Rear Shaft Length(mm) | 15 |
| No. of Leads | 4 |
| Lead Length(mm) | 500 |
| Weight(KG) | 1.7 |
