This dual shaft nema 23 CNC stepper motor has holding torque 0.6Nm(85oz.in) with 2.8A current each phase. A length of 15mm rear shaft is available.
Electrical Specification
Part Number: 57HS41-2804D
Step Angle: 1.8deg
Bipolar/Unipolar: Bipolar
Holding Torque: 0.6Nm(85oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 0.7ohms
Inductance: 1.4mH
Driving Voltage: 24-48VDC
Physical Specification
Frame Size: 57x57mm
Body Length: 41mm
Front Shaft Diameter: Φ8mm
Front Shaft Length: 21mm
D-cut Length: 18mm
Rear Shaft Diameter: Φ8mm
Rear Shaft Length: 15mm
D-cut Length: 14mm
Number of Leads: 4
Lead Length: 500mm
Weight: 0.5kg
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.6 |
| Holding Torque(oz.in) | 85 |
| Rated Current(A) | 2.8 |
| Phase Resistance(ohm) | 0.7 |
| Phase Inductance(mH) | 1.4 |
| Physical Specification | |
| Frame Size(mm) | 57x57 |
| Body Length(mm) | 41 |
| Shaft Type | D-cut |
| Single Shaft/Dual Shaft | Dual Shaft |
| Front Shaft Diameter(mm) | 8 |
| Front Shaft Length(mm) | 21 |
| Rear Shaft Diameter(mm) | 8 |
| Rear Shaft Length(mm) | 15 |
| Lead Length(mm) | 500 |
| Weight(KG) | 0.5 |
