This dual shaft nema 17 stepper motor has 34mm body length and holding torque 0.32Nm (45.3oz.in) with rated current 1.3A each phase. A length of 15mm rear shaft and 1m Cable & JST XH Plug Connector are available for this model.
Electrical Specification
Part Number: 42HS34-1334B
Step Angle: 1.8deg
Bi/Unipolar: Bipolar
Holding Torque: 0.32Nm(45.3oz.in)
Rated Current/phase: 1.33A
Phase Resistance: 2.7ohms
Inductance: 4.2mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 42x42mm
Body Length: 34mm
Shaft Diameter: Φ5mm
Front Shaft Length: 24mm
D-cut Length: 20mm
Rear Shaft Length: 15mm
D-cut Length: 14mm
Number of Leads: 4
Lead Length: 1000mm
Weight: 250g
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.32 |
| Holding Torque(oz.in) | 45.3 |
| Rated Current(A) | 1.33 |
| Phase Resistance(ohm) | 2.7 |
| Phase Inductance(mH) | 4.2 |
| Physical Specification | |
| Frame Size(mm) | 42x42 |
| Body Length(mm) | 34 |
| Single Shaft/Dual Shaft | Dual Shaft |
| Shaft Diameter(mm) | 5 |
| Front Shaft Length(mm) | 24 |
| Rear Shaft Length(mm) | 15 |
| No. of Leads | 4 |
| Lead Length(mm) | 1000 |
| Weight(KG) | 0.25 |
