This DUAL SHAFT NEMA 17 stepper motor is with step angle 1.8deg and size 42x42x34mm. It has 4 wires with 500m cable, each phase drawing current 0.4A at 12V, with holding torque 0.26Nm(36.8oz.in) and a length of 15mm rear shaft.
Electrical Specification
Part Number: 42HS34-0404B
Step Angle: 1.8deg
Bi/Unipolar: Bipolar
Holding Torque: 0.26Nm(36.8oz.in)
Rated Current/phase: 0.4A
Phase Resistance: 30ohms
Inductance: 37mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 42x42mm
Body Length: 34mm
Front Shaft Diameter: Φ5mm
Front Shaft Length: 24mm
Front D-cut Length: 20mm
Rear Shaft Diameter: Φ5mm
Rear Shaft Length: 15mm
Rear D-cut Length: 14mm
Number of Leads: 4
Lead Length: 500mm
Weight: 230g
Wires Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.26 |
| Holding Torque(oz.in) | 36.8 |
| Rated Current(A) | 0.4 |
| Phase Resistance(ohm) | 37 |
| Phase Inductance(mH) | 30 |
| Physical Specification | |
| Frame Size(mm) | 42x42 |
| Body Length(mm) | 34 |
| Shaft Type | D-cut |
| Front Shaft Diameter(mm) | 5 |
| Front Shaft Length(mm) | 24 |
| Rear Shaft Diameter(mm) | 5 |
| Rear Shaft Length(mm) | 15 |
| No. of Leads | 4 |
| Lead Length(mm) | 500 |
| Weight(KG) | 0.23 |
