BLDC-5020 Brushless DC Motor Driver 24-50VDC 15A 500W
Key Features
- PWM technologies, current-speed double closed-loop, high torque at low speed, stable working.
- Stable output torque at high speed, Max. speed 8000rpm/min.
- Max speed control 1:75, lowest speed could be 60rpm when works with 4 poles. More poles wider speedcontrol.
- Suitable for muitiple-pole setting 60°/300°/120°/240°.
- Two ways to control speed: Potentiometer-control & Analog input.
- Start/Stop, Quick brake, CW/CCW switch input signal (optical-isolated).
- Check speed output, Alarm output signal (optical-isolated, OC output).
- Alarm for over current, over voltage, stall, out of control.
Electrical performance:
- Input power: 24~50V DC power supply, capacity: according to motor power selection.
- Output current: rated 15A, instantaneous maximum 35A (≤ 3s).
- Drive mode: SPWM sine wave drive output.
- Insulation resistance: >500M9 under normal temperature and pressure.
- Insulation strength: 500V/min at normal temperature and pressure.
- Weight: about 300g.
Environmental requirements
- Cooling method: natural cooling.
- Use occasions: Avoid dust, oil tickets and corrosive gases.
- Operating temperature: 0°C-+50°C.
- Ambient humidity: <80%, no condensation, no frost.
- Vibration: The maximum does not exceed 5.7a/s.
- Save: -20°C -+125°C to avoid dust.
