This small hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws current 0.6A, allowing for a holding torque of 0.03(4.2oz.in). The mounting frame is 16x16mm and a length 400mm cable with plug connector is available.
Electrical Specification
Part Number: 20HS33-0604B10
Step Angle: 1.8deg
Bipolar/Unipolar: Bipolar
Holding Torque: 0.03Nm(4.2oz.in)
Rated Current/phase: 0.6A
Phase Resistance: 6.5ohms
Inductance: 2.2mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 20x20mm
Body Length: 33mm
Shaft Type: Round
Shaft Diameter: Φ4mm
Shaft Length: 10mm
Number of Leads: 4
Lead Length: 400mm
Weight: 80g
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.03 |
| Holding Torque(oz.in) | 4.2 |
| Rated Current(A) | 0.6 |
| Phase Resistance(ohm) | 2.2 |
| Phase Inductance(mH) | 6.5 |
| Physical Specification | |
| Frame Size(mm) | 20x20 |
| Body Length(mm) | 33 |
| Shaft Type | Round |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Diameter(mm) | 4 |
| Shaft Length(mm) | 10 |
| No. of Leads | 4 |
| Lead Length(mm) | 400 |
| Weight(KG) | 0.08 |
