This is the longest nema 8 stepper motor we have. It has 4 wires, each phase draws 0.6A, 42mm body length with holding torque 0.05Nm(7.1oz.in). Please note this motor has a 15.4mm bolt spacing & 16.0mm pilot circle.
Electrical Specification
Part Number: 20HS42-0804S
Step Angle: 1.8deg
Bipolar/Unipolar: Bipolar
Holding Torque: 0.05Nm(7.1oz.in)
Rated Current/phase: 0.8A
Phase Resistance: 5.4ohms
Inductance: 1.5mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 20x20mm
Body Length: 42mm
Shaft Diameter: Φ4mm
Shaft Length: 10mm
D-cut Length: 7mm
Number of Leads: 4
Lead Length: 300mm
Weight: 90g
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.05 |
| Holding Torque(oz.in) | 7.1 |
| Rated Current(A) | 0.8 |
| Phase Resistance(ohm) | 5.4 |
| Phase Inductance(mH) | 1.5 |
| Physical Specification | |
| Frame Size(mm) | 20x20 |
| Body Length(mm) | 42 |
| Shaft Type | D-cut |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Diameter(mm) | 4 |
| Shaft Length(mm) | 10 |
| No. of Leads | 4 |
| Lead Length(mm) | 300 |
| Weight(KG) | 0.09 |
