This nema 14 stepper motor has 0.9deg step angle with size 35x35x28mm. It has 4 wires, each phase draws 0.4A with holding torque 0.11Nm (15.5oz.in).
Electrical Specification
Part Number: 35HM28-0404S
Step Angle: 0.9deg
Bi/Unipolar: Bipolar
Holding Torque: 0.11Nm(15.6oz.in)
Rated Current/phase: 0.4A
Phase Resistance: 25ohms
Inductance: 24mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 35x35mm
Body Length: 28mm
Shaft Diameter: Φ5mm
Shaft Length: 24mm
D-cut Length: 15mm
Number of Leads: 4
Lead Length: 500mm
Weight: 140g
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 0.9 |
| Holding Torque(Nm) | 0.11 |
| Holding Torque(oz.in) | 15.6 |
| Rated Current(A) | 0.4 |
| Phase Resistance(ohm) | 25 |
| Phase Inductance(mH) | 24 |
| Physical Specification | |
| Frame Size(mm) | 35x35 |
| Body Length(mm) | 28 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| No. of Leads | 4 |
| Lead Length(mm) | 500 |
| Weight(KG) | 0.14 |
