This is 0.9deg nema 14 stepper motor with size 35x35x20mm. It has 4 wires, each phase draws 0.5A with holding torque 0.05Nm (7.1oz.in).
Electrical Specification
Part Number: 35HM20-0504S
Step Angle: 0.9deg
Bi/Unipolar: Bipolar
Holding Torque: 0.05Nm(7oz.in)
Rated Current/phase: 0.5A
Phase Resistance: 10ohms
Inductance: 8.2mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 35x35mm
Body Length: 20mm
Shaft Diameter: Φ5mm
Shaft Length: 15mm
D-cut Length: 10mm
Number of Leads: 4
Lead Length: 300mm
Weight: 100g
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 0.9 |
| Holding Torque(Nm) | 0.05 |
| Holding Torque(oz.in) | 7.1 |
| Rated Current(A) | 0.5 |
| Phase Resistance(ohm) | 10 |
| Phase Inductance(mH) | 8.2 |
| Physical Specification | |
| Frame Size(mm) | 35x35 |
| Body Length(mm) | 20 |
| Shaft Type | D-cut |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 15 |
| No. of Leads | 4 |
| Lead Length(mm) | 300 |
| Weight(KG) | 0.1 |
