This length of 42mm bipolar NEMA 14 stepper motor has 4 wires, each phase draws 0.5A with holding torque 0.23Nm/32.66oz.in. A JST connector XH2.54-4PIN is fixed at the terminal cable.
Electrical Specification
- Part Number: 35HS42-0504A
- Step Angle: 1.8deg
- Bi/Unipolar: Bipolar
- Holding Torque: 0.23Nm/32.66oz.in
- Rated Current/phase: 0.5A
- Phase Resistance: 15ohms
- Inductance: 26mH
- Driving Voltage: 12-24VDC
Physical Specification
- Frame Size: 35x35mm
- Body Length: 42mm
- Shaft Diameter: Φ5mm
- Shaft Length: 24mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead Length: 660mm
- Weight: 250g
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.23 |
| Holding Torque(oz.in) | 32.66 |
| Rated Current(A) | 0.5 |
| Phase Resistance(ohm) | 15 |
| Phase Inductance(mH) | 26 |
| Driving Voltage(VDC) | 12-24 |
| Physical Specification | |
| Frame Size(mm) | 35x35 |
| Body Length(mm) | 42 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| No. of Leads | 4 |
| Lead Length(mm) | 660 |
| Weight(KG) | 0.25 |
